TU Delft login

Gas Metal Arc welding

Previous Page back |Print Document print | 98 of 357 | « previous | next »

Tandem Wire Gas Metal Arc welding equipment.png

Contact details

Hermans, M.J.M. Dr.ir.
Mechanical, Maritime and Materials Engineering (3mE), Materials Science and Engineering, Joining and Mechanical Behaviour
Mekelweg 2, 2628 CD Delft
Tel : +31 (0)15 27 82286
E-mail : M.J.M.Hermans@tudelft.nl
Website : Open website

General Information

Instrument:

Gas Metal Arc welding

Location:

Department of Materials Science and Engineering, Room 3B-0-55, Mekelweg 2, Delft (building #34)

Key words:

Gas Metal Arc Welding (GMAW), Metal Inert Gas / Metal Active Gas welding (MIG/MAG), tandem wire welding, pulsed welding

Main application:

Welding and joining.

Instrument specification

Type:
Quinto 503 (2x)

Manufacturer:
Cloos

Wire feed speed:

0.0 – 30.0 m.min-1

Pulse frequency:

20 - 400 Hz

Peak current:

5 - 600 A in I/I mode

Peak voltage:

15.0 – 70.0 V in U/I mode

Peak time:

0.50 – 5.00 ms

Base current:

5 - 500 A

Pulse edge:
1) Block pulse
2-4) inclined edges

Arc length regulation:

0-100%


Type:
VR7000

Manufacturer:
Fronius

Digitally controlled wirefeeder