TU Delft login

Vacuum oven

Previous Page back |Print Document print | 150 of 357 | « previous | next »


Contact details

Lindstedt, Sebastiaan Ing.
Aerospace Engineering (LR), Design and Production of Composite Structures
Kluyverweg 1, 2629HS Delft
Tel : +31 (0)15 27 89744
E-mail : S.Lindstedt@tudelft.nl
Website : Open website

General Information


Vacuum oven


Several vacuum ovens


Delft Aerospace Structures & Materials Laboratory, Kluyverweg 1, Delft (building #41)

Key words:

vacuum, heater, oven, heating resistance, Temperature contoller

Main application:

In a vacuum oven, the thermal processes occur in an airtight chamber where a desired level of vacuum has been applied. With a vacuum oven the entire application can take place under vacuum or a controlled atmosphere can be created through the introduction of an inert gas. Vacuum ovens can help in the prevention of surface reactions (such as oxidation), decontaminating samples (removing lubricants for example) as well as for speeding up the out gassing process.

Instrument specification

  1. Vacuum oven Heraeus
    type Degussa 16/1332
    Tmax: 240°
    2 grids of 400x300mm
    pump vacuum brand membrane
    Liquid Moulding lab

  2. Vacuum oven Heraeus
    type VTR 5036
    Tmax: 180°
    2 levels 300 x 150 mm

  3. Vacuum oven Heraeus
    type TUH  50/60
    Tmax: 350°C
    volume 600x600x600 mm
    Composites lab

  4. Vacuum oven Heraeus
    type RVT500
    Tmax: 150°
    level 400x600 mm